Today, I found one method (MLE) that could be useful for my research.
Summary:
It is Maximum Likelihood Estimate (MLE).
It is about how to estimate one parameter so that the probability of our sample (NMR T2 distribution) happening could be the largest. The method can not make sure to predict NMR T2 distribution, it can just adjust parameters to make the probability to be the largest.
If it could be applied to NMR T2 distribution, the steps may be:
1. set parameters for normal and log-normal distributions;
2. build the estimating function;
3. solve the function;
4. obtain the best parameters;
5. estimate the errors and evaluate the results.
For now, I am trying to know how to build the estimating function with these parameters. I will try to set parameters reasonably so that it can be applied to this method.
Tomorrow, I will continue to learn about this method.
1/24/2017
1/23/2017
Divide T2 distribution
Today, I tried to figure out how to divide T2 distribution into 2 or 3 Gaussian or log-normal distributions.
Summary:
First, I looked into many distributions and found that normal and log-normal may be the most suitable ones. For example, Poisson distribution is more suitable for integers.
Both normal (Gaussian) and log-normal distributions have 2 parameters, namely miu and sigma. So one distribution includes two parameters. Today, I found that most papers said about how to add two or more distributions into one, but not dividing.
Later on, I found that Matlab can fit one distribution to one normal or log-normal distribution. However, it cannot fit one distribution to two or more normal and log-normal distributions. At least, I have not found it out.
Then, I tried to look for some papers about how to divide T2 distributions, but I have not found it out. Most papers just talk about how their models predict data well. One of the papers I read divided T2 distributions into 8 CMR Bin Porosity (CBP). So the prediction of T2 distribution turned into the prediction of 8 CBPs. There are 4 models to be compared. Every CBP is predicted by 4 models and the paper found that CMIS (Committee machine with intelligent systems), which is the combination of the other three models, performed the best.
I think that it is more reasonable to directly divide T2 distributions into 2 or 3 other distributions. The problem now is that I am not sure how to divide.
Tomorrow, I will continue to try to find how to divide T2 distributions into normal and log-normal distributions.
Summary:
First, I looked into many distributions and found that normal and log-normal may be the most suitable ones. For example, Poisson distribution is more suitable for integers.
Both normal (Gaussian) and log-normal distributions have 2 parameters, namely miu and sigma. So one distribution includes two parameters. Today, I found that most papers said about how to add two or more distributions into one, but not dividing.
Later on, I found that Matlab can fit one distribution to one normal or log-normal distribution. However, it cannot fit one distribution to two or more normal and log-normal distributions. At least, I have not found it out.
Then, I tried to look for some papers about how to divide T2 distributions, but I have not found it out. Most papers just talk about how their models predict data well. One of the papers I read divided T2 distributions into 8 CMR Bin Porosity (CBP). So the prediction of T2 distribution turned into the prediction of 8 CBPs. There are 4 models to be compared. Every CBP is predicted by 4 models and the paper found that CMIS (Committee machine with intelligent systems), which is the combination of the other three models, performed the best.
I think that it is more reasonable to directly divide T2 distributions into 2 or 3 other distributions. The problem now is that I am not sure how to divide.
Tomorrow, I will continue to try to find how to divide T2 distributions into normal and log-normal distributions.
1/20/2017
Finish selecting data
Today, I read two papers and finished selecting parameters from Hess data.
It may be the final version of our parameters for our research. I think I have included all possible parameters into it.
I have sent it to you by email. It is in 6 edition sheet.
Next week, I will focus on how to divide NMR T2 distribution into 2 or 3 Gaussian or log-normal distribution and find the unknowns.
It may be the final version of our parameters for our research. I think I have included all possible parameters into it.
I have sent it to you by email. It is in 6 edition sheet.
Next week, I will focus on how to divide NMR T2 distribution into 2 or 3 Gaussian or log-normal distribution and find the unknowns.
1/19/2017
Apply data to R
Today, I reviewed R codes and started to apply the data to R.
I have sent you the data by email. If there is no problem, I will work on them.
I have done the depth matching. They are now can be applied to R without hesitation.
Tomorrow, I will continue to split the data and pre-process the data.
I have sent you the data by email. If there is no problem, I will work on them.
I have done the depth matching. They are now can be applied to R without hesitation.
Tomorrow, I will continue to split the data and pre-process the data.
1/18/2017
Deal with the data
Today, I changed the parameters as you said. Also, I added 4 new parameters to my data matrix. I tried to deal with the data so that they can be applied to R.
In addition, I have a question when I select more data today.
New parameters:
I have collected all the parameters to IP software named NMRprediction. There are 23 parameters in total. 1 is depth and 1 is NMR permeability. So the total is 25.
Question:
New parameters:
| SonicScanner:DTCO | ||
US/FT
|
| QElan:DPHZ | ||
ft3/ft3
|
I have collected all the parameters to IP software named NMRprediction. There are 23 parameters in total. 1 is depth and 1 is NMR permeability. So the total is 25.
Question:
What is the difference between QElan and RTscanner and Sonicscanner? They all include data from AT10 to AT90. I compared them and found that they almost have the same values. The difference is that QElan and RTscanner data depth range is from about 9000 ft to 11200 ft and Sonicscanner data depth range is from about 2000 ft to 11200 ft. For now, I selected AT10, AT60 and AT90 from Sonicscanner.
Tomorrow, I will continue to deal with the data and code.
Tomorrow, I will continue to deal with the data and code.
1/17/2017
Continue to select data and read the book
Today, I finished selecting data from Hess. In addition, I tried to find some papers and books about predicting NMR permeability and pore size distribution. I also read one of the book about NMR.
Parameters:
(Do you have any recommendations of these parameters? should I delete or add some parameters else?)
Parameters:
| NMR_IP:nmrPerm | ||||||
md
|
| Wire:DPHI_SAN | ||||||||||||||||||||||||||||||||||||||||
ft3/ft3
|
(Do you have any recommendations of these parameters? should I delete or add some parameters else?)
Tomorrow, I will read books and papers about predicting NMR permeability and pore size distribution.
| wu |
1/16/2017
Select Data
Today, I reviewed the data in IP and selected about 20 parameters from IP. I also did depth matching so that they can be applied to R as a total data matrix.
The data has been saved in Excel.
Tomorrow, I will continue to select parameters from IP. Once finished, I will start to use it in R.
The data has been saved in Excel.
Tomorrow, I will continue to select parameters from IP. Once finished, I will start to use it in R.
Subscribe to:
Posts (Atom)